Jewelry jewelry cleaning method: 1. Handmade washing method: This on a convenient work table on a soft cloth or soft towel, take a small plastic bowl, and the water that is more than half of the temperature, add a drop of water, add a drop of drop. detergent. After the cleaning liquid is ready, small brushes (or cotton, small brush, old toothbrushes, watercolor pens, etc.) made with a natural fiber, some sharp wooden sticks or toothpicks can be cleaned for gems or gem materials -plastic or plastic or plastic or plastic or gem material. Nylon -made brushes cannot be used! When cleaning: (1) The soft cloth and soft towels on the working surface are indispensable. Do not use. (2) The detergent containing ammonia, acid, alcohol or other chemical ingredients cannot be abused. It is used as appropriate depending on the type of gem material materials to avoid gemstone discoloration. (3) When the stains on the gem material must be scraped, the small wooden stick is used to cut the end and gently scrape it, and the metal materials such as the pointed head nails should not be used. (4) It is best to use water about 30 degrees Celsius. The hot water can soften the sticky glue, and it can also make the gem from damage to the heating vibration. (5) Equipped with a magnifying glass to observe the cleaning effect from time to time. (5) The gem material after cleaning should be dried in a cool place. It cannot be placed directly under the sun and is exempted from being destroyed by the sun or ultraviolet rays. (6) Soaking is not good for certain gem materials, because these gem materials can absorb water and cause color changes. Organic gem materials can also cause changes in their internal material structure. (7) Before pouring the cleaning solution, pay attention to the number of gem materials. Note that the broken diamonds around the diamond may be washed off. (8) After washing, wipe it with a soft dry cloth to make the jewelry reproduce the gloss and shine. 2. Mechanical washing method: Even the experts, using this method is extremely cautious, because in addition to the harm of the waves, the hazard caused by the heat The description is as follows: (1) Ultrasonic washing: The ultrasonic washing device to concentrate on the solid surface of the cleaning solution (that is, the surface of the gem material) to form a small vacuum. Remove dirt. The ultrasonic washing device has a good washing effect on K gold, vegetarian gold, and some gems. In particular, the gemstone sewing can be cleaned in the fine sewing of the gemstone. But the vibration of its waves and the increase in the temperature of the washing tank is not good for some gem materials, so that the liquid and other natural parcels, cracks, etc. in the gemstone expand the explosion, and even destroy the structure of the gemstone, so the ultrasonic wave is washed The machine is not suitable for all gems, such as emeralds, pearls, etc. should be absolutely avoided. The although the ultrasonic cleaning machine is good, it should not be used often because it is easy to use. If you use too frequent, it is easy to make the small drill can not afford multiple shocks and loosen or even drop it. fall. (2) Steam washing: The is very effective when cleaning the metal gem material, but it can cause serious problems for exquisite or glue gems. (3) Boil: The temperature change caused by this method is very dangerous. If this method must be washed, it is best to preheat the gem material before putting it in boiling water. Dry. 3. Precautions for clean jewelry (1) Be careful when using solution to use clean jewelry. Most of the jewelry cleaner contains Armania water (that is, ammonia water). In addition to cleaning the gem, it can also make the metal brighter. Armania is safe for most gems, but the exception to pearls and pores (such as pine stones, etc.). (2) Do not use bleaching water. The chlorine in the bleaching water will make the alloy pits, decompose alloys, and even erode welding. (3) Do not use laundry powder, cleaner and toothpaste with abrasive. Because toothpaste contains fine high hardness grinding particles, these particles are small but hardness is as high as six or seven degrees (almost the same as crystal). Therefore, cleaning jewelry with toothpaste will damage the surface of gemstones with low crystal hardness, especially pearls and gold And K gold surface. The most correct washing solution should be diluted neutral interface active agents (such as salads and baby shampoo). (4) Do not boil in the cleaning agent or sulfuric acid. (5) Do not wash it with boiling water. The physical characteristics of diamonds are relatively stable and can be cleaned with boiling water, but some other gems (such as amethyst) are very fragile and are easily affected by temperature drama. You should try to avoid boiling water as much as possible.
When buying jewelry, many merchants did not emphasize the cleaning of jewelry, which led to the jewelry worn by many users. As everyone knows, different types of jewelry have different cleaning methods, and even some jewelry cannot be washed with water. Therefore, in order to clean the jewelry for popular science, various types of jewelry cleaning methods are compiled below.
Emerald (jade) The emerald is mainly based on hard jade minerals, but emerald is equivalent to ligament, because jadeite also has other substances, which can be said to be relatively simple for the cleaning of jadeite. It can be gently wiped off the material on the emerald with water. After wiping, gently sweep the jadeite with a ponytail bristles. And after wiping, you can also use a small amount of white tea oil to moisturize. It can not only lock the emerald's moisture, but also improve the luster and moisturization of the emerald.
Agate (chalcedony) Agate is a type of chalcedony, with a hardness of about 6.5-7. Generally, there are various colors such as green, red, yellow, brown, and white. It when cleaning agate, you can simply clean it with pure water, and you can also let the agate soak in pure water, and keep the humid agate better. No other cleaner is required, so as not to destroy the color of the agate surface.
diamond (diamond) The diamond belongs to diamond. It is a natural mineral. The main component is the composition of carbon elements. The diamond cleaning is relatively simple. If the surface is large and fat, the diamond looks blurred. You can put it in the jewelry cleaning liquid for 5 minutes, then gently brush the diamond with a small toothbrush, and then rinse it with water. Dry water.
Pearls (organic gems) Pearls are an organic gem. The main component is calcium carbonate, and chemical stability is very poor. The pearl cleaning needs a lot of details. First of all, it cannot be cleaned with any cleaner. Secondly, wipe the pearls cannot be used with noodle paper. Cashmere cloth needs to be used. Mattimed with cashmere cloth when cleaning, who wipes the pearls a little. If the pearl is yellow, it can be bleached by 1%-1.5%hydrogen peroxide, but pay attention to the amount.
The Shoushan Stone (color stone) Shoushan stone is generally not large, basically about 30 grams, and it is one of the four major seal stones in China. The Shoushan Stone does not have too many taboo things. When cleaning, you can wipe it with water. Be careful not to expose it. After wiping the water, you can gently wipe the gap dust with a small toothbrush.
For jewelry gold, it is as important as people. During the process of washing, it can activate tissue cells, remove dirt, and make the body and outside the body have a fresh feeling. They are in the best situation at any time, brilliant, and can grow their lives. A. Cleaning: Use a soft brush to dip the salad to remove it, but it is not possible to clean it with irritating products such as fluoride toothpaste or bleaching water. B. Cleaning: Pure gold or K gold products, please do not touch the perm water and other items. After contact, white spots will be generated. C. Cleaning: Soak the diamond in warm soapy water for about 20 minutes, and light the bottom of the table with a soft brush, and then wash it with water (remember to stuff the flowing pores first to prevent the gem from falling off). Essence D. Maintenance: Pay attention to whether the diamond will loosen after cleaning. Every 6 months should go to the jewelry shop for the jewelry store for your jewelry for thorough cleaning and inspection. (1) Cleaning and maintenance of gold and silver jewelry 1. Cleaning and maintenance of gold jewelry: Wash in Huangfang Jewelry Store, use ultrasonic washing grooves, washing the standard formula: 40c warm water 1000 ml, no water without water without water, no water without water without water without water without water without water without water without water. 100 grams of chromicide and 30 ml of sulfuric acid. The method is: hang the jewelry on the plastic sheet number, then wear copper wire, hang it on the stainless steel rod, suspend it in the washing tank, and the washing time is 80 to 120 seconds. The hand -cleaning method is to soak the jewelry in 30 % of the sulfuric acid washing solution for 5 minutes, wash it with a brush, then rinse under the tap water cage for 5 minutes, and finally use 20 % shampoo or washing fine foam 10 Wash in minutes, flush water for 20 minutes, and dry it with silk. 2. Cleaning and maintenance of silver jewelry: Use 50C temperature water 1000 ml, 200 ml of phosphate, 30 grams of concentrated laundry powder, wash the liquid ultrasonic cleaning tank for 100 seconds, and then rinse the water. The home cleaning: Pour the cleaning liquid in a container, soak the silver jewelry for 10 minutes, then wash it with a toothbrush, and then flush the water for 10 points. (2) Cleaning of gemstone jade The washing with a 20 % neutral dishwashing or shampoo, and a liquid temperature of 25 to the tadpole. Soak for 10 minutes, then slowly brush with a toothbrush. After removing the sweat staining dirt, soak it with tap water for 20 minutes. (3) The maintenance of jewelry jade It gold and silver jewelry jade rinse after rinse, such as scratching and scratches on its surface, you can apply a layer of white jade toothpaste on the surface, use Wipe the silk cloth, and you can also use a cloth wheel to polish, or glow with green oil. The chain and gold earrings can be poured a little watch oil on the hooks and screws, or the light coating protective film. The commonly used light protective film is paraffin. The commonly used gem protective film is pink nail polish. Nail oil is wide, such as chest ornaments, rings, earrings, ears, stirring, brooches, buttons, etc. At present, the popular protective agents are: transparent electrical paint, B0L acrylin paint; soz type polyuretine paint. It is mostly suitable for high -end gems, such as emeralds, rubies, salamanders, sea sapphires, emeralds, etc. (4) The cleaning and maintenance of pearls The cleaning of pearls should be wiped with soft paper or soft cloth containing silicon oil. For pearls with severe light and non -light dirt, 20 % salt water is soaked for an hour. Then wash it with a 3 % hydrochloric acid solution and rinse in water for 10 minutes. Pearls should not be exposed to sun exposure, tide and camphor and other camphor of hygiene.
The jewelry is easy to dirty after wearing it for a long time. Try this trick, clean and clean as new n00:00 / 01: 2870% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
Do n’t clean it in the gold and silver jewelry, teach you a trick, you ca n’t get the gram after washing n00:00 / 01: 3470% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increased by 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
Jewelry jewelry cleaning method:
1. Handmade washing method:
This on a convenient work table on a soft cloth or soft towel, take a small plastic bowl, and the water that is more than half of the temperature, add a drop of water, add a drop of drop. detergent. After the cleaning liquid is ready, small brushes (or cotton, small brush, old toothbrushes, watercolor pens, etc.) made with a natural fiber, some sharp wooden sticks or toothpicks can be cleaned for gems or gem materials -plastic or plastic or plastic or plastic or gem material. Nylon -made brushes cannot be used! When cleaning:
(1) The soft cloth and soft towels on the working surface are indispensable. Do not use.
(2) The detergent containing ammonia, acid, alcohol or other chemical ingredients cannot be abused. It is used as appropriate depending on the type of gem material materials to avoid gemstone discoloration.
(3) When the stains on the gem material must be scraped, the small wooden stick is used to cut the end and gently scrape it, and the metal materials such as the pointed head nails should not be used.
(4) It is best to use water about 30 degrees Celsius. The hot water can soften the sticky glue, and it can also make the gem from damage to the heating vibration.
(5) Equipped with a magnifying glass to observe the cleaning effect from time to time.
(5) The gem material after cleaning should be dried in a cool place. It cannot be placed directly under the sun and is exempted from being destroyed by the sun or ultraviolet rays.
(6) Soaking is not good for certain gem materials, because these gem materials can absorb water and cause color changes. Organic gem materials can also cause changes in their internal material structure.
(7) Before pouring the cleaning solution, pay attention to the number of gem materials. Note that the broken diamonds around the diamond may be washed off.
(8) After washing, wipe it with a soft dry cloth to make the jewelry reproduce the gloss and shine.
2. Mechanical washing method: Even the experts, using this method is extremely cautious, because in addition to the harm of the waves, the hazard caused by the heat The description is as follows:
(1) Ultrasonic washing:
The ultrasonic washing device to concentrate on the solid surface of the cleaning solution (that is, the surface of the gem material) to form a small vacuum. Remove dirt. The ultrasonic washing device has a good washing effect on K gold, vegetarian gold, and some gems. In particular, the gemstone sewing can be cleaned in the fine sewing of the gemstone.
But the vibration of its waves and the increase in the temperature of the washing tank is not good for some gem materials, so that the liquid and other natural parcels, cracks, etc. in the gemstone expand the explosion, and even destroy the structure of the gemstone, so the ultrasonic wave is washed The machine is not suitable for all gems, such as emeralds, pearls, etc. should be absolutely avoided.
The although the ultrasonic cleaning machine is good, it should not be used often because it is easy to use. If you use
too frequent, it is easy to make the small drill can not afford multiple shocks and loosen or even drop it. fall.
(2) Steam washing:
The is very effective when cleaning the metal gem material, but it can cause serious problems for exquisite or glue gems.
(3) Boil:
The temperature change caused by this method is very dangerous. If this method must be washed, it is best to preheat the gem material before putting it in boiling water. Dry.
3. Precautions for clean jewelry
(1) Be careful when using solution to use clean jewelry. Most of the jewelry cleaner contains Armania water (that is, ammonia water). In addition to cleaning the gem, it can also make the metal brighter. Armania is safe for most gems, but the exception to pearls and pores (such as pine stones, etc.).
(2) Do not use bleaching water. The chlorine in the bleaching water will make the alloy pits, decompose alloys, and even erode welding.
(3) Do not use laundry powder, cleaner and toothpaste with abrasive. Because toothpaste contains fine high hardness grinding particles, these particles are small but hardness is as high as six or seven degrees (almost the same as crystal). Therefore, cleaning jewelry with toothpaste will damage the surface of gemstones with low crystal hardness, especially pearls and gold And K gold surface. The most correct washing solution should be diluted neutral interface active agents (such as salads and baby shampoo).
(4) Do not boil in the cleaning agent or sulfuric acid.
(5) Do not wash it with boiling water. The physical characteristics of diamonds are relatively stable and can be cleaned with boiling water, but some other gems (such as amethyst) are very fragile and are easily affected by temperature drama. You should try to avoid boiling water as much as possible.
When buying jewelry, many merchants did not emphasize the cleaning of jewelry, which led to the jewelry worn by many users. As everyone knows, different types of jewelry have different cleaning methods, and even some jewelry cannot be washed with water. Therefore, in order to clean the jewelry for popular science, various types of jewelry cleaning methods are compiled below.
Emerald (jade)
The emerald is mainly based on hard jade minerals, but emerald is equivalent to ligament, because jadeite also has other substances, which can be said to be relatively simple for the cleaning of jadeite.
It can be gently wiped off the material on the emerald with water. After wiping, gently sweep the jadeite with a ponytail bristles. And after wiping, you can also use a small amount of white tea oil to moisturize. It can not only lock the emerald's moisture, but also improve the luster and moisturization of the emerald.
Agate (chalcedony)
Agate is a type of chalcedony, with a hardness of about 6.5-7. Generally, there are various colors such as green, red, yellow, brown, and white.
It when cleaning agate, you can simply clean it with pure water, and you can also let the agate soak in pure water, and keep the humid agate better. No other cleaner is required, so as not to destroy the color of the agate surface.
diamond (diamond)
The diamond belongs to diamond. It is a natural mineral. The main component is the composition of carbon elements.
The diamond cleaning is relatively simple. If the surface is large and fat, the diamond looks blurred. You can put it in the jewelry cleaning liquid for 5 minutes, then gently brush the diamond with a small toothbrush, and then rinse it with water. Dry water.
Pearls (organic gems)
Pearls are an organic gem. The main component is calcium carbonate, and chemical stability is very poor.
The pearl cleaning needs a lot of details. First of all, it cannot be cleaned with any cleaner. Secondly, wipe the pearls cannot be used with noodle paper. Cashmere cloth needs to be used.
Mattimed with cashmere cloth when cleaning, who wipes the pearls a little. If the pearl is yellow, it can be bleached by 1%-1.5%hydrogen peroxide, but pay attention to the amount.
The Shoushan Stone (color stone)
Shoushan stone is generally not large, basically about 30 grams, and it is one of the four major seal stones in China.
The Shoushan Stone does not have too many taboo things. When cleaning, you can wipe it with water. Be careful not to expose it. After wiping the water, you can gently wipe the gap dust with a small toothbrush.
For jewelry gold, it is as important as people. During the process of washing, it can activate tissue cells, remove dirt, and make the body and outside the body have a fresh feeling. They are in the best situation at any time, brilliant, and can grow their lives.
A. Cleaning: Use a soft brush to dip the salad to remove it, but it is not possible to clean it with irritating products such as fluoride toothpaste or bleaching water.
B. Cleaning: Pure gold or K gold products, please do not touch the perm water and other items. After contact, white spots will be generated.
C. Cleaning: Soak the diamond in warm soapy water for about 20 minutes, and light the bottom of the table with a soft brush, and then wash it with water (remember to stuff the flowing pores first to prevent the gem from falling off). Essence
D. Maintenance: Pay attention to whether the diamond will loosen after cleaning. Every 6 months should go to the jewelry shop for the jewelry store for your jewelry for thorough cleaning and inspection.
(1) Cleaning and maintenance of gold and silver jewelry
1. Cleaning and maintenance of gold jewelry: Wash in Huangfang Jewelry Store, use ultrasonic washing grooves, washing the standard formula: 40c warm water 1000 ml, no water without water without water, no water without water without water without water without water without water without water without water. 100 grams of chromicide and 30 ml of sulfuric acid. The method is: hang the jewelry on the plastic sheet number, then wear copper wire, hang it on the stainless steel rod, suspend it in the washing tank, and the washing time is 80 to 120 seconds. The hand -cleaning method is to soak the jewelry in 30 % of the sulfuric acid washing solution for 5 minutes, wash it with a brush, then rinse under the tap water cage for 5 minutes, and finally use 20 % shampoo or washing fine foam 10 Wash in minutes, flush water for 20 minutes, and dry it with silk.
2. Cleaning and maintenance of silver jewelry: Use 50C temperature water 1000 ml, 200 ml of phosphate, 30 grams of concentrated laundry powder, wash the liquid ultrasonic cleaning tank for 100 seconds, and then rinse the water.
The home cleaning: Pour the cleaning liquid in a container, soak the silver jewelry for 10 minutes, then wash it with a toothbrush, and then flush the water for 10 points.
(2) Cleaning of gemstone jade
The washing with a 20 % neutral dishwashing or shampoo, and a liquid temperature of 25 to the tadpole. Soak for 10 minutes, then slowly brush with a toothbrush. After removing the sweat staining dirt, soak it with tap water for 20 minutes.
(3) The maintenance of jewelry jade
It gold and silver jewelry jade rinse after rinse, such as scratching and scratches on its surface, you can apply a layer of white jade toothpaste on the surface, use Wipe the silk cloth, and you can also use a cloth wheel to polish, or glow with green oil. The chain and gold earrings can be poured a little watch oil on the hooks and screws, or the light coating protective film.
The commonly used light protective film is paraffin. The commonly used gem protective film is pink nail polish. Nail oil is wide, such as chest ornaments, rings, earrings, ears, stirring, brooches, buttons, etc. At present, the popular protective agents are: transparent electrical paint, B0L acrylin paint; soz type polyuretine paint. It is mostly suitable for high -end gems, such as emeralds, rubies, salamanders, sea sapphires, emeralds, etc.
(4) The cleaning and maintenance of pearls
The cleaning of pearls should be wiped with soft paper or soft cloth containing silicon oil. For pearls with severe light and non -light dirt, 20 % salt water is soaked for an hour. Then wash it with a 3 % hydrochloric acid solution and rinse in water for 10 minutes. Pearls should not be exposed to sun exposure, tide and camphor and other camphor of hygiene.
The jewelry is easy to dirty after wearing it for a long time. Try this trick, clean and clean as new
n00:00 / 01: 2870% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
Do n’t clean it in the gold and silver jewelry, teach you a trick, you ca n’t get the gram after washing
n00:00 / 01: 3470% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increased by 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description